0.2 Metre Type D HDMI Male to Type A HDMI Female Adapter CableOverview - One connector is Type A and the other is Type D. The ‘Type’ stands for the size of connector used and the amount of pins it has. Type D is backwards compatible with type A and has the same number of pins (19). Type D is commonly used on mobile phones and other portable devices and Type A is found on the majority of new TVs. So you can check whether you are purchasing the correct cable, the size of the Type D connectors is 6.4mm width and 2.8mm height. High Speed With Ethernet – Transfers data within the tolerances of the 'High Speed' specification. It also has an additional channel for Ethernet which allows both devices which are connected to the HDMI cable to access the internet, even if only one of them is physically connected to the internet via Wi-Fi or an RJ45 cable.HDMI lead supports - 1080p, 3D & 4x2K resolutions. Gas Injected Dielectric Material - This material is used for isolation, to keep the capacitance low and to maintain the signal strength and impedance across the cable. Gold plated & Shielded – The connectors on this cable are solid brass conductors with 24 carat gold plating, the cable has a dense shield to keep out any unwanted interference. OFC – The lead is made using 99.99% oxygen free copper which increases the signal quality across the length of the cable. This generates a much purer signal.HDCP (High-Bandwidth Digital Content Protection) - This lead is compatible with content scrambling used in current equipment, such as TVs. Cable strain relief to protect the cable - Enables the HDMI lead to be bent in a multitude of directions without breaking, unlike many poorer quality HDMI leads sold by different companies. Standards - HDMI ATC compliance-tested, ROHS