The Makita DHP481 LXT combi drill is powered by an 18v lithium-ion battery and the brushless motor enables up to twice the run-time of traditional motors. This two-speed drill will run up to 2,100rpm in high gear and 550rpm in low. It will deliver 31,500 impacts per minute in high gear and 8,250 impacts per minute in low gear. The 13mm single sleeve keyless chuck enables 16mm capacity in masonry, 13mm in steel and a massive 76mm in timber. Torque can be adjusted to 21 alternative settings and has a dedicated drilling mode. The DHP481 will generate 60Nm of fastening torque (soft joint) and between 115-125Nm (hard joint), the highest torque yet from the Makita 18v range.

Brand Name	Makita
Colour	N/A
Material	N/A
Manufacturer Model No	MAKDHP481Z
Wear Type	N/A
Type	Combi Drill
Certifications Met	N/A
Country of Origin	N/A
Protects From	N/A
Waterproof	N/A
Number of Pockets	N/A
Voltage	18v
Power Output (W)	640
Soft Application Max Torque (Nm)	60
Hard Application Max Torque (Nm)	115-125
Torque Settings	21 + Drill
Brake Type	Electric
No. of Gears	2
LED Job Light	Yes / Twin / After-glow
Battery Capacity Indicator	Yes
Battery Compatibility	18v Lithium-Ion (LXT)
Rotation	Forward / Reverse
Variable Speed Control Trigger	Yes
No Load Speed (RPM) High	0-2100
No Load Speed (RPM) Low	0-550
Chuck Type	3-Jaw / Single Sleeve Keyless / All Metal
Chuck Capacity (mm)	13
Drill Capacity: Concrete (mm)	16
Drill Capacity: Metal (mm)	13
Drill Capacity: Wood (mm)	76
Impact Rate (BPM) High	0-31500
Impact Rate (BPM) Low	0-8250
Overall Length (mm)	205
Net Weight (Approx. Kg) with 1.5/2Ah Batt	2.5
Net Weight (Approx. Kg) with 3/4/5Ah Batt	2.7
Brushless Motor	Yes

The Makita DHP486Z 18V LXT Brushless Hammer Driver Drill provides 130Nm of maximum fastening torque and no load speed of 2,100rpm combining rapid drilling speeds with high levels of torque. This model is based on the DHP481, but has been redesigned with a newly designed motor and gear ratio achieving not only more power but also increasing the performance in continuous heavy-duty applications. Not only has the performance on the DHP481 been increased but it is also considerably shorter. At 178mm in length this model is 27mm shorter than the DHP481. Making it the most compact drill in its class and extremely comfortable to use in all applications.

Features

Forward / reverse rotation
Single sleeve keyless chuck allows for easy bit installation/removal by one hand.
Electric brake 2 mechanical gears.
Variable speed control by trigger
Best possible ergonomic handle for drill-driver applications.
Brushless motor
LED job light
All metal gear construction
Metal gear housing

Specification

Chuck Capacity - 1.5 - 13 mm
No Load Speed (Hi) - 0 - 2,100 rpm
No Load Speed (Lo) - 0 - 550 rpm
Blows per Minute (Hi) - ipm - 0 - 31,500 ipm
Blows per Minute (Lo) - ipm - 0 - 8,250 ipm
Voltage - 18 v
Max. in wood - 76 mm
Max. in masonry - 16 mm
Max. in steel - 13 mm
Torque Settings - 21 + Drill
Battery Type - Lithium-ion
Vibration K factor - 1.5 m/sec²
Noise sound pressure - 84 dB(A)
Noise sound power - 95 dB(A)
Noise K factor - 3 dB(A)
Net weight - 2.3 – 2.7 kg
Max. Fastening Torque (Soft Joint) - 65 Nm
Max. Fastening Torque (Hard Joint) - 130 Nm
Vibration: Impact drilling into concrete - 8.0 m/sec²
Vibration: Drilling into metal - 2.5 m/sec²

Standard Equipment

1x DHP486Z Combi Drill Body Only
1x Side Handle
1x Depth Stop
1x Belt Clip

Warranty

Brand Name	Makita
Manufacturer Model No	0088381739566
mpn	DHP486Z