DHP487 Combi Drill
Highly durable aluminium diecast gear housing protects the tool for potential damage that may occur on a jobsite
Forward & reverse 3 Drilling Modes: Screwdriving mode (rotation with clutch) for achieving an even consistent finish when fastening screws.
Drilling mode (rotation only) achieving 40Nm max. torque.
Hammer Drilling mode (rotation with hammering) for drilling in masonry up to a maximum 13mm hole diameter
All metal gears and gear housing for more efficient power transmission
Ultra-compact design (only 164mm long)
Dual LED lights to illuminate the work area

DTD157 Impact Driver
Brushless motor eXtreme Protection Technology (XPT) offers maximum protection against dust, debris and liquids for optimal performance in extreme conditions
Compact housing sizes around the motor allow for easy screwdriving in tight corners
2-Stage power selection for controlled fastening speed
A-Mode stabilises screw whilst fastening into wood
Brushless Motor produces 140Nm of max. tightening torque

DHP487 Combi Drill
Impact Rate Low/High: 0-7,500/0-25,500 ipm
Max Drill Masonry: 13 mm Max Drill Steel: 13 mm
Max Drill Wood: Auger bit: 36mm / Self-feeding bit: 35mm / Hole saw: 51mm
No Load Speed Low/High: 0-500/0-1,700 rpm
Blows per Minute Low/High: 0-7,500/0-25,500 bpm
Max Tightening Torque Hard/Soft: 40/25 Nm
Overall Length: 164 mm
Net Weight (With Battery, Sold Separately): 1.7kg 
Sound Pressure Level (LpA): 83 dB (A)
Sound Power Level (LWA): 94 dB (A)
Sound Uncertainty (K): 3 dB (A)
Drilling Vibration Level (Concrete): 10.5 m/sec²
Drilling Vibration Level (Metal): 2.5 m/sec²
Drilling Vibration Uncertainty (K): 1.5 m/s²

DTD157 Impact Driver
Driving Shank: 6.35mm (1/4in).
No Load Speed: 0-1,300/0-3,000/min.
Impact Rate: 0-2,000/0-4,100/bpm.
Max. Fastening Torque: 140Nm.
Capacity: Bolt: Standard M5-M14, High Tensile M5-M12.
Machine Screw: M4-M8.
Coarse Thread: 22-90mm.
Weight: 1.2kg.

1x DHP487 Combi Drill LXT
1x DTD157 Impact driver LXT
2x 5Ah Batteries
1x Case