Suretherm Anti Condensation Paint is an internal water-based emulsion designed to combat mould and damp caused by condensation. It contains glass microspheres to absorb heat, preventing condensation and mould growth. It can be applied to various surfaces and is suitable for bathrooms, kitchens, and areas with cold walls.

Brand Name	N/A
Colour	White
Material	Glass microspheres
Manufacturer Model No	N/A
Wear Type	N/A
Type	Paint
Certifications Met	N/A
Country of Origin	N/A
Protects From	Condensation and Mould
Waterproof	N/A
Number of Pockets	N/A
Application	Ensure the area is well ventilated before applying. Stir gently and thoroughly before use. DO NOT use a powered mixing paddle as this will impact the performance of the coating. Ensure application temperature is between 5-25°C. Surfaces should be clean, dry and free from grease and dirt. Remove all loose and defective paint and lightly sand glossy areas with sandpaper. Any visible mould should be cleaned with Suretherm Preparation Treatment Spray. Apply two coats of Suretherm, allowing 4 hours between coats. The coating should be touch dry in 2 hours depending on humidity and temperature. Allow for extra drying time in cold and wet weather conditions. For best results, use a medium pile roller. New plasterwork should be allowed to dry completely before applying Suretherm.
Finish	Matt
Formulation	Water-based
Recoat	4 hours
Numbers of Coats	2 Coats
Coverage	Approximately 4-5m² per litre after 2 coats